Free Newsletter
HEAT AIR NEWS
Breaking News and Technical Articles for the HVAC Community, by EmailREFRIGERANTS  |  POLICY  |  DATA CENTERS  |  DEALS  |  TECHNICAL
Subscribe Free
EventsAboutContactNewsletter
Technical

ANSI Approves ACCA's Revised Manual D and Four Other Standards Actions

Manual D is the only one of the five with new technical content beyond a Manual S addendum. Manual J keeps its 2016 calculations, and the revision ACCA had planned for 2026 has moved to 2027. None of the five is published yet.

Key TakeawayThe ACCA Educational Institute said Nov. 13 that ANSI approved five standards actions spanning residential design and quality installation. Manual D-2026 and Addendum c to Manual S carry technical changes, while Manual J, ACCA 5 QI and QIvp were renewed with their content unchanged.

The Air Conditioning Contractors of America Educational Institute said Nov. 13 that the American National Standards Institute has approved four ACCA standards and one addendum, covering the residential design sequence from load calculation through duct layout as well as the quality installation pair used for verification programs. ACCA said the documents are being prepared for publication and will be announced when they are available.

Manual D Gets the Substantive Changes

ANSI/ACCA Manual D-2026, Residential Duct Systems, "contains revisions that refine key definitions, provide clearer installation guidance, and address return air pathways to improve system efficiency and comfort," ACCA said. Manual D uses heating and cooling loads to set the air delivery each room needs. The revision went through a first ANSI public review that opened Feb. 23, 2024, and a second, limited to further modifications, that ran Feb. 14 to March 16, 2025.

"The revisions to Manual D® reflect ACCA's ongoing commitment to ensuring that HVACR professionals have the most accurate and practical guidance for residential duct system design," Wes Davis, ACCA director of technical services, said when the second review opened.

Addendum c to ANSI/ACCA 3 Manual S-2023, Residential Equipment Selection, joins Addenda a-2024 and b-2024 as a supplement to the base standard. When ACCA opened the project in April 2025, it said the addendum would correct and clarify certain requirements in the standard's normative sections. A first public review draft came out June 6, 2025, and a second review of modifications drawn from those comments ran Oct. 31 to Nov. 30, 2025. ACCA notes that Manual S is specified in the International Residential Code and the Uniform Mechanical Code.

Three Standards Renewed Without Technical Changes

ANSI/ACCA 2 Manual J-2026, Residential Load Calculation, was approved as a "new" standard with technical content unchanged from the 2016 edition. Load calculations done to Manual J are required by national building codes and most state and local jurisdictions, ACCA said. A separate revision project is under way, and ACCA now plans its changes for 2027. When it opened the reaffirmation review in November 2025, it said those changes were planned for 2026.

ACCA 5 QI-2026, HVAC Quality Installation Specification, sets minimum requirements for designing, installing, testing and commissioning residential and light commercial systems. ANSI/ACCA 9 QIvp-2026 gives the protocols for verifying that an installation meets ACCA 5 QI. Both were approved with content unchanged under ANSI's five-year Essential Requirements. The October 2025 public review notice for QI described the purpose as "regaining its ANSI designation as a new standard," with text unchanged from the 2015 edition.

Why This Matters to Contractors

ACCA gave no effective or publication date for any of the five documents. Building codes cite a specific edition of each referenced standard, so the edition an inspector asks for depends on which code a jurisdiction has adopted, and the 2026 printings do not replace those references on their own. For Manual J users, the one-year slip in the revision project means the 2016 calculation procedures, reissued under a 2026 date, remain the current ACCA method until that revision is approved.

Sources

  1. ACCA, "ACCA Announces ANSI Approval of Five Standards Actions," Nov. 13, 2026. acca.org
  2. ACCA, "Second ANSI public review for additional modifications to proposed Manual D (Residential Duct Systems) revisions," Feb. 14, 2025. acca.org
  3. ACCA, "New project notification for proposed addenda to ACCA Manual S - 2023, Residential Equipment Selection," April 11, 2025. acca.org
  4. ACCA, "ACCA announces second ANSI public review for modifications to proposed 'Addendum c' to Manual S," Oct. 28, 2025. acca.org
  5. ACCA, "ACCA announces ANSI Public Review for reaffirmation of ANSI/ACCA Manual J - 2016, Residential Load Calculation," Nov. 5, 2025. acca.org
  6. ACCA, "ACCA announces ANSI Public Review for proposed ACCA 5 QI, HVAC Quality Installation Manual," Oct. 10, 2025. acca.org
  7. ACCA, "ACCA announces ANSI Public Review for Reaffirmation of ANSI/ACCA 9 QIvp - 2016," Oct. 9, 2025. acca.org
Technical > StandardsACCAANSIManual JManual SManual DACCA 5 QIQIvpLoad CalculationDuct DesignQuality InstallationResidential HVAC